Service; New Password; Currency; Date/Time - Power One AURORA PVI-10.0-I-OUTD-400 Installations- Und Bedienungshandbuch

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
5.5.6.3

Service

Only installation staff may access this function. A dedicated password, only
supplied by Power-One is necessary to gain access.
5.5.6.4

New password

This function is used to change the default password, 0000.
To enter your own personal code, the display keys must be used in the following
way:
Use ENTER to scroll from one digit to another (from left to right)
Use ESC to return to the previous digit (from right to left)
Press ESC repeatedly to return to the previous menus, as described in
chapter.5.5.3
Use DOWN to scroll through the numbers in descending order (from 9 to
0)
Use UP to scroll through the numbers in ascending order (from 0 to 9)
5.5.6.5

Currency

This function regards the energy output earnings.
Name: set the desired currency, using the keys as described above. The default
currency is the Euro.
Val/KWh: indicates the cost of 1 KWh expressed in the set currency. The default
setting is 0.50 Euros.
5.5.6.6

Date/Time

The time and date can be modified from this section, if necessary.
5.5.6.7

Language

It is possible to set one of the following languages: ENGLISH, GERMAN,
ITALIAN, FRENCH, SPANISH, CZECH.
Name EUR
Val/KWh 00.50
Time 14:21
Date 17 May 2006
English
Italian
67 97
Page of