Imp. Display - Power One AURORA PVI-10.0-I-OUTD-400 Installations- Und Bedienungshandbuch

Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
5.5.6.2

Imp. Display

This function allows you to set the display characteristics:
1) Light: display light setting:
- With the MODE key, it is possible to control the display backlighting.
After selecting the Mode entry with the arrow and pressing ENTER, you will
access the following submenu. The next screen is:
ON : Light always on
OFF : Light always off
AUTO: Automatic light management. The light turns on every time a key is
pressed, and remains on for 30 seconds before gradually turning itself off.
- The INTENSITY key allows for the regulation of backlight intensity on a scale of
1 to 9
2) Contrast : Display light contrast
The scale of the display light tones go from 0 to 9.
To select the number, press the UP and DOWN keys to scroll and then ENTER to
confirm your choice.
3) Buzzer: key tone setting
Selecting:
ON : key tones are on
OFF : key tones are off
Light
Contrast
Buzzer
Mode
Intensity
ON
OFF
Auto
66 97
Page of