MICRO-EPSILON capaNCDT 6100 Betriebsanleitung Seite 54

Operation
Fig. 6
i
>
>
The following assignment applies for a standardized setting value:
Trimmer position
Left stop
Middle
Right stop
capaNCDT 6100
Sensor/
Synchronization
Signal conditioning board with trimmer potentiometers
Disconnect the power supply before touching the sensor surface.
Static discharge
Danger of injury
Adjustment
Minimum
Medium
Maximum
Gain
Zero
Standardized value
0.00
5.00
10.00
Power/
Output
Page 54