19 7.1 Change Batteries; Replace Mirror; 20 7.3 Replacement Parts/ Parts Subject To Wear; 20 8.1 Change Of Location - Bosch ACC 200 Originalbetriebsanleitung

7. Maintenance
7.1 Change batteries
Open the screw cover on the rear of the wheel laser.
Remove the used batteries and replace these with new
ones. Ensure the correct polarity!
7.2

Replace mirror

i
The replacement of the mirror is carried out accord-
ing to section 5.2.
7.3 Replacement parts/ parts subject
to wear
Designation
Installation equipment, complete
Rail (with mounting material)
Mirror, with metal frame
Radlaser,Wheel laser, complete
Quick-action clamp
Control angle for rails
Batteries* (2 items) for wheel laser
)
Type: Mignon 1,5V (LR 6 / AA / AM3)
Part subject to wear
*)
i
Do not use accumulators instead of batteries. Accu-
mulators have too low a voltage!
FIAT AG
8.
8.1
¶
If the ACC 200 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
¶
The ACC 200 is only ever to be transported in the
original or equivalent packaging.
8.2
¶
Dismantle the ACC 200 and sort out and dispose of
the different materials in accordance with the appli-
cable regulations.
8.3
Order number
0 684 300 103
(2021200000)
1 687 016 144
(2021201000)
1 685 350 014
(2021202000)
1 685 357 058
(2021203000)
1 690 501 250
(2021204000)
1 681 320 077
(2021205000)
Customary in the
trade
9.
Function
Dimensions (H x W x D)
Latching equipment
Accuracy
Adjustment height
Laser service dates (wheel laser /
coarse installation equipment)
Laser diode
Wavelength
Radiation level
Point size
Work range
Temperature range
Voltage supply
Rail weight
Reflector weight
Maintenance | ACC 200 | 29
Decommissioning
Change of location
Disposal and scrapping
Disposal
ACC 200 satisfies the criteria of the Europe-
an Directive WEEE 2012/19/EU.
Old electrical and electronic devices, including-
cables and accessories or batteries must be
disposed of separate to household waste.
¶
Please use the return and collection sys-
tems in place for disposal in your area.
¶
Damage to the environment and hazards to
personal health are prevented by properly
disposing of ACC 200.

Technical Data

Specification
627 x 752 x 79 mm
-2°, 0°, +2°
±0.05°
360, 390, 430 and 470 mm
Laser class 2
650 nm + 10 nm
0.5 mW - 1 mW
Ø 3 mm
approx. 30 m
–10 °C to +40 °C
3 V - 6 V
7.5 kg
14 kg
1 689 989 226
en
|
2019-07-24