Internal Chamber Dimensions; Safety Information - FIMAR MINI Betriebs- Und Wartungsanleitung

Internal chamber dimensions

mm A B
MINI
500 510
FME/4
610 610
FME/4+4 610 610
FME/6 610 915
FME/6+6 610 915
FME/9
910 910
FME/9+9 910 910
FML/4 720 720
FML/4+4 720 720
FML/6
720 1080
FML/6+6
720 1080
FML/9 1080 1080
FML/9+9 1080 1080

Safety information

•
Careful consultation of this manual before installation and use is essential. Continual observance of the
indications found in the manual guarantee personal and machine safety.
•
Never tamper with safety devices for any reason
•
Strict observance of the work safety regulations issued by the responsible organisations in each country
is strongly recommended.
•
The manufacturer is not liable for damages to persons or things due to the neglect of safety regulations.
•
Correct machine placement, illumination and cleanliness are important conditions for personal safety.
•
Do not expose the machine to the elements.
•
Machine connections and start-up must only be performed by specialised technicians.
•
Make sure that the system specifications of the room where the machine is installed correspond to the
information printed on the plate.
• Make sure the machine is connected to a grounding system.
• The work area around the machine must always be kept clean and dry.
• Use the garments foreseen by work safety regulations.
•
This machine must only be used for its specific purpose; any other use is considered improper and
therefore hazardous.
• Do not overload the machine.
•
Introducing objects, tools, hands or other within hazardous parts is forbidden.
•
Keep the machine away from children.
•
Disconnect the power cord from the electrical socket when the machine is not in use.
•
In the event of malfunctions and/or problems, do not attempt to repair the machine.
authorised dealer.
•
Use original spare parts.
•
Before cleaning the machine, disconnect the power supply by unplugging the machine.
•
Do not clean with running water.
C
140
140
140
140
140
140
140
140
140
140
140
140
140
INFORMATION
7
1
GENERAL
Contact the