Consultation Guide; Routine Maintenance; Extraordinary Maintenance; Recycling - FAS 300 T Handbuch

FAS 300 T - ISSUE 01

CONSULTATION GUIDE

SYMBOL

ROUTINE MAINTENANCE

Pay particular attention to those parts of the text which are written in bold type, with larger letters or underlined
as these are used to highlight particularly important operations or information.
The enclosed wiring diagrams are intended for use exclusively by specialised technical personnel authorised
by the manufacturer to carry out extraordinary maintenance operations and checks.
It is strictly prohibited to use the wiring diagrams to modify the machine.
Throughout the manual, when referring to the machine, the terms "at the front" or "front" indicate the door side
while the terms "at the back" or "rear" indicate the other side; the terms "right" and "left" refer to the operator
facing the front of the machine.
For each operation to be carried out on the machine, a level of expertise (see below) is given to indicate the
persons qualified to perform the operation concerned.
Final user
Ordinary
maintenance
operator
Extraordinary
maintenance
operator
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
MEANING
DANGER
WARNING
EXTRAORDINARY
MAINTENANCE

RECYCLING

Person without specific expertise able to perform the operations of purchasing and
retrieving the product only by using the controls displayed on the machine or by
following the instructions given on the display.
Person capable of carrying out the operations in the above point and, in addition, of
operating on the machine following the instructions in this manual marked with the
symbol .
Person capable of carrying out the operations in the above points and, in addition,
of operating on the machine following the instructions in this manual marked with the
symbols . In each case, the specialized technicians must also be capable of
operating with the protections disabled and therefore in reduced safety conditions.
Any operations to be carried out with the parts of the machine in movement and/or
on live equipment must only be performed in exceptional cases and once the
impossibility of operating in suitable safety conditions has been established. Access
to these areas should be permitted only to persons with a practical knowledge and
experience of the machine, particularly in matters of safety and hygiene.
COMMENT
Indicates a danger, even mortal, for the User.
Indicates a warning or notes on key functions or useful
information.
Pay careful attention to those parts of the text indicated
by this symbol.
The maintenance personnel are requested to take a
measurement value, check a signal, check the correct
position of any machine element, etc. prior to
performing a determined command or operation.
By routine maintenance, it is intended: the reloading
operations, emptying out the coins, and the cleaning
operations in the areas in contact with the food
products.
By extraordinary maintenance, it is intended: the more
complex maintenance
electrical, etc.) in particular situations, or those agreed
with the user which are not considered ordinary
maintenance.
Obligation to dispose of the materials respecting the
environment.
operations (mechanical,
info@fas.it
7
E
N
G
L
I
S
H