FAS 300 T Handbuch Seite 70

68
Remove the top filter by removing the set screw (ref.6).
Remove the bottom filter by unscrewing the set screw (ref.7).
Immerse the whole unit in a cleaning solution and let it soak for approx. twenty minutes.
Carefully wash and dry all the parts with hot water and ensure that all the elements through which the coffee
passes and the pressing element vents are clean.
If necessary, replace the gaskets and filters.
With the infusion chamber still in the position where it is extended as far as possible, remount the bottom filter.
Remount the pressing element support.
Attach the unit to the support and screw on the knob making sure that the joint of the ratio-motor is correctly
centred (ref.8).
E
Remount the coffee dispensing tube and the water inlet tube.
N
G
L
Switch on the vending machine. Carry out two or three empty washes, through icon
I
S
H
menu ).
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
FAS 300 T - ISSUE 01
(see the services
info@fas.it