FAS 300 T - ISSUE 01
COFFEE BEANS LOADING
Apply the "MAX" label to indicate the required level for correct
operation at approximately 4 cm from the top edge.
The procedure for loading the coffee beans is as follows:
• Lift off the lid of the coffee bean hopper (pos.1).
• Pour in the coffee beans. (pos.2)
• Do not exceed the maximum level line.
It is not necessary to remove the bean hopper in order to fill it up.
To remove the bean hopper completely, proceed as follows:
• Slide locking flange of the bean hopper downwards (pos.3).
•
Lift up the hopper and remove it.
PAYMENT SYSTEM CONNECTION
The coin mechanism must be connected and disconnected
with the machine switched off.
The vending machine is set up for payment systems with
'EXECUTIVE', 'MDB' and 'BDV' protocols.
•
Fasten the coin mechanism on the support between the two
pins.
•
Connect the coin mechanism connectors to the machine.
•
Adjust the coin chute on the coin mechanism opening
•
Adjust the coin return button leverage
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
25
E
N
G
L
I
S
H
info@fas.it