Update Configuration - FAS 300 T Handbuch

FAS 300 T - ISSUE 01
9.2.4

UPDATE CONFIGURATION

CONFIGURATION: Identifies the set of machine parameters such as recipes, boiler temperature, pre-washes,
presence or lack of kits,etc.
After setting the correct "CONFIGURATION code" in the ID parameters,
the configuration.
The update can be performed remotely
which case the configuration file must be pre-loaded on to the tablet using a USB pen drive.
The remote upgrade is completely automatic: the tablet connects to the specific server, downloads the file,
installs and then runs the updated configuration.
The file relative to the configuration is a compressed file (.zip extension) whose name is made up by any alpha-
numeric sequence of a max 20 characters (E.g. CONFIG0004zip.zip). To load this file up to the tablet after
copying it to a USB pen drive, proceed as follows:
Insert the pen drive in the USB port marked with label "USB- All applications"
select the "copy from USB" icon
the USB key that will be automatically copied to the tablet. After copying, the multimedia will be updated by
selecting the "locally" icon
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
(if the tablet is connected to the internet) or locally
; a dialogue window open allowing you to select the desired file from
.
this icon gets used to update
info@fas.it
57
E
N
G
L
; in
I
S
H