Introduction; Registration Number Plate; In Case Of Failure - FAS 300 T Handbuch

4
This documentation is an integral part of the machine and must therefore accompany every movement
or transfer of property for consultation by the operator.
Before proceeding to the installation and the use of the distributor, it is necessary to carefully read and
understand the content of this booklet as it gives important information concerning safety of installation, rules
for the use and operations for the maintenance.
The installation and subsequent maintenance operations, must only be carried out by suitably qualified
E
personnel allocated to assistance and/or maintenance service.
N
This machine should be destined only to the use for which it has been expressly conceived. Any other
G
use is to be considered improper.
L
I
S

REGISTRATION NUMBER PLATE

H
Each vending machine is identified by a specific registration number which is placed on the plate within the
vending machine. This plate is the only one acknowledged by the manufacturer as the exclusive vending
machine identification and it bears all data that give all technical information and allow an easy spare parts
management. It is therefore advised not to damage or remove the means which are necessary for the
identification of the product.

IN CASE OF FAILURE

In most cases, the possible technical problems are easily solvable with few intervention; therefore, we kindly
suggest you to read this booklet carefully before consulting the manufacturer.
In case of anomalies or malfunctions that cannot be solved, fill in the fault or defect notification form in its every
part and send it to the manufacturer as soon as possible:
FAS International S.p.A., Customer Service, 60 Via Lago di Vico - 36015 Schio (VI) - Italy
Tel.: +39 0445 502011
All requests regarding the vending machine must be with its registration number.
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
1
This manual has been prepared for the most complete model: consequently there may
be extra descriptions or explanations that do not apply to your machine.
Fax: +39 0445 502010

INTRODUCTION

E-mail: info@fas.it
FAS 300 T - ISSUE 01
info@fas.it