FAS 300 T Handbuch Seite 73

FAS 300 T - ISSUE 01
N° ALARM
A08 Coffee doser 1
A09 Wrong position of coffee
unit
A10 Delivery time-out
(selections with
espresso)
A11 Coffee unit return error
A12 Grinding time-out
A13 Espresso coffee unit not
installed correctly
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
TIME-OUT
FAILURE
(sec.)
variable The coffee doser
microswitch does not
change status after
having dispensed the
ground coffee dose.
5 The unit does not
reach the dispensing
position or unit
closed position.
2 The impulse time
counted by the
volumetric meter
exceeds the time-
out.
10 The unit does not
move to open
position.
variable programmed grinding
maximum time has
been passed.
* Check that the unit open micro (MCRG) switches
correctly (see Input status below menu
Services
* Check the correct functioning of gear motor (MGC)
SOLUTION
* Coffee doser 1 is clogged
* Check that the doser micro (MCDC 1)
switches correctly (see
below menu Services
* Remove the g.e.p unit from the vending
machine and check, when empty, the correct
rotation of the coffee unit motor (Through the
unit feed function). If there are any
inconveniences, Check that the coffee unit is
not clogged or broken. Otherwise, if there are
some inconveniences, you have to:
* Check that the coffee unit closed micro
(MCPG) switches correctly (see
status below menu Services
* Check the correct functioning of gear motor
(MGC)
* Check the fan.
* The coffee unit filter is clogged.
* Check the water pump.
* Check the drink dispenser tubes.
* Remove the g.e.p unit from the vending
machine and check, when empty, the correct
rotation of the coffee unit motor (Through the
unit feed function). If there are any
inconveniences, Check that the coffee unit is
not clogged or broken. Otherwise, if there are
some inconveniences, you have to:
* Check the correct calibration of the cam
relative to the coffee unit open micro (MCRG)
(see Input
Services
* Check the correct functioning of gear motor
(MGC)
* The coffee is finished
* Check the correct functioning of coffee
grinder motor (MMC)
* Check that the coffee doser micro (MCDC)
switches correctly (see
below menu Services
* Check the position of the coffee unit.
71
Input status
Input
status below menu
Input status
info@fas.it
E
N
G
L
I
S
H