Coffee Unit, Coffee Unit Presence Control - FAS 300 T Handbuch

FAS 300 T - ISSUE 01

COFFEE UNIT, COFFEE UNIT PRESENCE CONTROL

Infusion chamber is driven by a gear motor (MRGC) through a joint.
Microswitches MCRG - MCPG define the work positions of the unit during the coffee cycle, specifically:
• MCGR = OPEN UNIT POSITION
• MCPG = CLOSED UNIT POSITION (defines the motor stop in rest/dispensing position, infusion pump start,
opening of coffee solenoid valve.)
The coffee unit operation is managed by a microswitch (CPGC) which detects its presence in the support: if
the coffee unit is installed, it works properly otherwise the following functions are inhibited
•
Service function for the coffee unit feed
•
Service function for rinsing cycle for coffee unit
•
Service function for coffee grinding
•
Service function for ground coffee dosage
•
Inhibition of all the selections for espresso coffee + instant
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
19
E
N
G
L
I
S
H
info@fas.it