FAS 300 T Handbuch Seite 55

FAS 300 T - ISSUE 01
9.2.1 UPDATE INTERFACE TYPE
INTERFACE: Identifies an interface in terms of graphics (colours, layout, button style...), operation
(category/selections, alphanumeric keypad, icon selection, sequence of screens to reach product selection).
After setting the correct interface code in the ID parameters,
The update can be performed remotely
which case the interface file must be pre-loaded on to the tablet using a USB pen drive.
Remote upgrade is completely automatic: the tablet connects to the specific server, downloads and installs
the file and then runs the interface.
The interface file is a compressed file (.zip extension) the name of which is formed from any alphanumeric
sequence of up to 20 characters (e.g. INTERFACCIA00000003.zip). To load this file up to the tablet after
copying it to a USB pen drive, proceed as follows:
Insert the pen drive in the USB port marked with label "USB- All applications"
select the "copy from USB" icon
the USB key that will be automatically copied to the tablet. After copying, the interface will be updated by
selecting the "locally" icon
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
(if the tablet is connected to the internet) or locally
; a dialogue window open allowing you to select the desired file from
.
use this icon to update the interface type.
53
E
N
G
L
I
S
H
; in
info@fas.it