Loading Instant Products - FAS 300 T Handbuch

24

LOADING INSTANT PRODUCTS

The automatic vending machine is intended to be used for dispensing beverages which are prepared by mixing
foodstuffs with water (Instant coffee, instant chocolate, sugar, coffee in beam form, instant tea, instant barley,
skimmed milk powder granules). Use only products which have been declared by the manufacturer as suitable
for automatic vending in refillable canisters. The selections dispensed by the automatic vending machine must
be consumed immediately and they must not be preserved or recycled for later use.
Adhere strictly to the manufacturer's indications regarding the expiry date for each individual product.
In the spare parts kit you will find the labels to apply to each canister indicating the name of the product
contained inside it (Pos.1). Apply the same label to the canister support bracket (Pos.2) to ensure that the
canisters are returned to the correct position once they have been filled up.
E
Apply the "MAX" label to indicate the required level for correct operation approximately 4 cm from the top edge
N
or next to the top reinforcement of each canister.
G
The procedure for loading the products is as follows:
L
•
Open the vending machine door.
I
•
Lift up the cover of the canister to be filled up (Pos.3).
S
•
Load the product taking care not to exceed the maximum level and make sure there are no lumps in the
H
powders. Do not press the powder into the canister.
•
Replace the cover.
To completely remove the canister:
•
Open the vending machine door.
•
Turn the dispenser union elbow located on the outlet hole of the canister upwards.
•
Push and lift the canister at the front to release it from the check pins placed on the front of the canister.
•
Remove the canister by pulling it outwards.
In any case, after having poured the product into the canister, return the canister to its seat with the dispenser
union elbow in its original position.
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
FAS 300 T - ISSUE 01
info@fas.it