Stirrer Dispenser - FAS 300 T Handbuch

FAS 300 T - ISSUE 01

STIRRER DISPENSER

Shift the movable guide "A" by removing the screws that secure it to adapt it to the length of the stirrers.
Remove the weight from the stirrer dispenser and load the stirrers into the c-shaped holder making sure
that they are all laying flat and in a horizontal position. Make sure that there are no defective stirrers or
stirrers with burrs. Once the stirrers have been loaded replace the weight on top of them.
To adjust the outlet to suit the thickness of the stirrers, remove the cover by pressing lever "B" indicated by
the arrow, loosen screw "C" and rotate lever "D" until you obtain the optimal position.
FAS International S.p.A. - Via Lago di Vico, 60 - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
23
E
N
G
L
I
S
H
info@fas.it