Saving A Standard - ColorLite XS1 Bedienungsanleitung

Saving a standard

Select the
menu with the last used names.
These names can be edited to
create a new name. If the last
character is a number it will be
automatically increased by 1 digit
Pressing the "ESCAPE"
delete the last character. To
complete the entry, select the
character and press "ENTER"
In the dialog box "Save/use standard" make the following
selection:
• Save and use
Save the standard with the given name in the standard
memory and then use.
• Use standard
The measured standard can be used by loading into the
working memory – this stays here until another standard
is loaded from the standard memory or a new standard is
measured.
62
symbol to open a
key will
ColorLite GmbH | sph870/sph900
• Continue name
Carry on writing standard name.
5.3 Saving a standard
To permanently store a measured standard in the
standard memory select "Save and use".
Before a standard can be stored in the memory,
at least one folder must be available. Up to five
folders can be created in the "Memory" – "Edit
folder" window.
Select the memory folder
using the navigation keys and
press
The next free space in
the specified folder will be
automatically selected.
To select a different
storage cell by entering
the cell number using the
navigation keys.The storage
procedure is completed by
leaving the index editor by
pressing "ENTER" or abort
the procedure using the
"ESCAPE" key.
.