Care And Maintenance; Casing; Probe Head; Bam-Standard - ColorLite XS1 Bedienungsanleitung

Care and maintenance

9 Care and maintenance
9.1

Casing

Special maintenance of the casing is not necessary. To
clean use only a damp cloth. Avoid the use of cleansers,
abrasives or solvents.
9.2

Probe head

Special maintenance of the probe head is also not
necessary. To clean use only a fine-haired brush to
remove dust and impurities from the sensor opening. To
clean the housing, use only a damp cloth. Avoid the use
of cleansers, abrasives or solvents.
9.3

BAM-Standard

To provide a reliable and stable calibration, the BAM
Standard is fitted into a cap precisely matching the
diameter of the probe head. To protect the BAM Standard
from dirt, always close the cap immediately after use.
Touching or attempting to clean the surface of the
BAM Standard, can make it unusable and result in
invalid readings!
76
9.4
The ColorLite GmbH offers a comprehensive service
and maintenance support for the sph xs1 and its
accessories. A regular service by the ColorLite
GmbH, depending on application intensity is
recommended every 1 - 2 years.
+49 (0) 5552 999 580
info@colorlite.de
ColorLite GmbH | sph870/sph900

Service