Power Supply - ColorLite XS1 Bedienungsanleitung

Power supply

On the top level menu "setting"
and "memory" are no longer
selectable. Furthermore, it is not
possible to measure a "Standard".
Standards can only be loaded from
the memory.
To disable the "User mode" select
"Measure" from the main menu.
In the following window go on
"Exit user mode" and confirm this
with Enter. You will be prompted to
enter the password.
After entering the correct password, the "User Mode"
is canceled and the unit will return to the measurement
menu.
If the "User mode" and also the function "Use
Working-Standard" [6.1.7 Using a work-ing standard]
are activated, it is only possible to calibrate with the
Working-Standard.
6.1.6 Power supply
An optional device holder is available for the sph xs1
which has an integrated power supply or a separate power
supply can be ordered.
68
When using an external power supply the Auto-
Power–Off function is deactivated [see 4.6 Auto-
Power-Off].
In the menu "Settings" - "System" go to „Ext.
power supply". By pressing the "Enter"
mode is activated, display by a tick in the check box.
By pressing the same key the function is deactivated
If the rechargeable battery is used, switch off the
ext. power supply mode.
ColorLite GmbH | sph870/sph900
key the