Saving A Standard - ColorLite Rugged 2 Bedienungsanleitung

5.3

Saving a standard

To permanently store a measured standard in the
standard memory select "Save and use".
Before a standard can be stored in the memory, at
least one folder must be available. Up to fi ve folders
can be created in the "Memory" – "Edit folder"
window.
Select the memory folder using Select the memory folder using
the navigation keys and press
The next free space in
the specifi ed folder will be
automatically selected.
To select a diff erent storage cell
by entering the cell number using
the navigation keys. The storage
procedure is completed by leaving
the index editor by pressing
"CENTER" or abort the procedure
using the "LEFT" key.
52
.
By pressing the
overwritten with the new values.
A maximum of 200 standards can be stored in each
folder. Up to 5 folders can be created, so that a total
of 1000 standards can be stored.
ColorLite GmbH | Rugged 2
If the selected memory cell is in
use the text "Slot is free" is re-
placed by the name of the stand-
ard. Also the colour values and the
date of storage are displayed.
If an occupied memory cell is se-
lected a warning message warns
that the old standard will be
deleted. The storage routine can be deleted. The storage routine can be
cancelled using the
key the old standard values will be
After successfully storing a refer-
ence standard colour, the cursor
moves to the "Scan sample"
position.
key.