Save Sample Data - ColorLite XS1 Bedienungsanleitung

Open from the main menu the "Measure" window.
Move the cursor to the "Scan sample" position using
the navigation keys.
Place the probe head on the sample
head handling]. The sample can now be scanned by
slowly lowering the probe head to trigger or press the
"ENTER" key and follow instructions.
The measuring data are
indicated.
To display the results in different colour scales,
press the Navigation
Which colour scales are available can be selected
in the "Settings" – "Colour systems" –
"Sample" menu [see 6.7 Colour
[see 4.9 Probe
keys.
systems].
ColorLite GmbH | sph870/sph900
To make a quick assessment of measured samples,
use the "PASS/FAIL" option
5.6

Save sample data

To save the measured sample data after measuring press
the „ENTER" key.
Each sample can be assigned an
exclusive name. This name can
consist of up to 20 characters,
digits or letters. Each character
is selected using the navigation
buttons
"Enter"
Select the
menu with the last used names.
These names can be edited to
create a new name. If the last
character is a number it will be
automatically increased by 1 digit
Pressing the "Escape"
will delete the last character. To
complete the entry, select the
character and press "Enter"
key.
Save sample data
[see 6.5 Pass/Fail].
and entered using the
key.
symbol to open a
key
65