D/0° - 38 Mm Probe Head; D/0° Calibration Standards - ColorLite XS1 Bedienungsanleitung

Device overview
To enable a reliable and consistent
calibration the BAM standard is in
a precisely fitted housing. The
dustproof cap doubles as the black
reference.
3.4 d/0° - 38 mm Probe head
The d/0° probe head with a 38 mm measuring area for
inhomogeneous samples is permanently connected to the
operating unit via a flexible stainless steel cable. With this
probe head the sample is diffusely illuminated and the
reflected measured at an angle of 0°.
This cable contains an optical fibre and should not be
forcefully bent (less than 15 cm radius) during the
measurements.
Fig. – d/0° Probe head for a
38 mm scanning area
50
3.4.1 d/0° Calibration standards
To calibrate the sph xs1 a certified white standard is
supplied. This standard is traceable to the normal of
the PTB (Physikalisch-Technische Bundesanstalt) in
Braunschweig and comes with a certificate from the
Fig. – BAM white
Standard and black
BAM (Federal Institute for Materials Research and
reference
Testing).
To enable a reliable and consistent calibration the
BAM standard is fitted housing which fits exactly on
the probe head. The light proof cover doubles as the
black reference.
The surface of the BAM
standard can be cleaned
using a isopropanol cleaner.
ColorLite GmbH | sph870/sph900
Fig. – BAM white Standard
and black reference