Settings
6
Settings
In the Settings menu, system and measurement
parameters are changed. The navigation in the menu tree
and the selection of individual menu items and parameters
are described - as in the previous chapters - with the
and
keys. Abort settings using the "ESCAPE"
6.1
System settings
Select from the top menu level "Settings" and then select
"System".
The following system parameters can be adjusted:
• Language – Date - Time
• Trigger
• User Mode
• Ext. power supply
• Use working standard
• Calibration warning
• Metamerism warning
• Standard deviation warning
66
• Autosave
• Wireless-LAN
• Best Match
6.1.1 Date
key.
To set the date, follow the instructions in chapter
4.7. Date and time
6.1.2 Time
To set the time of day, follow the instructions in
chapter
6.1.3 Language
To set the language, follow the instructions in
chapter
6.1.4 Trigger
The measurements can be started by pressing the
probe head downwards onto the sample or standard.
In the trigger setting this function can be switched
off. Also a control function can be used to check that
the probe head has not been moved during the scan
[see 4.9 Probe head
ColorLite GmbH | sph870/sph900
settings.
4.7. Date and time
settings.
4.8. language
settings.
handling].