Loading A Standard "By Index; Loading A Standard "By List & Best Match; Loading A Standard "By Name; Sample Measurement - ColorLite XS1 Bedienungsanleitung

Loading a standard
5.4.1

Loading a standard "By index"

Enter the standard index number
using navigation keys
standard name, values and date of
storage is displayed.
Select the standard using the "Enter"
routine using the "Escape"
5.4.2 Loading a standard "By list & Best Match"
After selecting the folder where
the standard is stored, a list of
available standards in the folder is
displayed. To load, scroll through
the standards using the navigation
"Enter"
Or simply scan unknown colour by triggering using the
probe head to start the measurement. The software
compares the scanned colour to the stored standards in
the folder and automatically jumps to the nearest or "best
matching" colour. This can be loaded using the "Enter"
key.
64
. The
key. Abort the
key.
keys and select using the
key.
ColorLite GmbH | sph870/sph900

5.4.3 Loading a standard "By name"

The third method is by name;
in this mode the software
checks the available names
and lists only the characters
that come in question. This
makes loading a standard
quick and very easy.
A short message
communicates that the
standard has been suc-
cessfully loaded
The device automatically
returns to the "Scan sample"
window and the active
standard is displayed in the
status bar
5.5

Sample measurement

Before measuring a sample a reference standard
colour must be measured
measurement] or selected from the internal memory.
[5.2 Standard