User Mode - ColorLite XS1 Bedienungsanleitung

Open the "Trigger" window.
The set option will be
displayed.
The measurement is triggered
by pressing down the outer
sleeve of the probe head
downwards.
This setting "Probe head with
control" checks that the probe
head is still on the surface
after the scan.
A warning message is
displayed when the "Probe
head is moved too early".
The measurement can then
be rejected – "Escape" - or
accepted – "Continue".
To deactivate the probe head
trigger select the "Off" setting
ColorLite GmbH | sph870/sph900

6.1.5 User Mode

By activating the "User mode" operation is limited to basic
functions; measure samples, loading standards from the
device memory and calibrating. The mode is protected by
a four-digit password.
To activate, select "User Mode"
from the "System" window in
"Settings" menu.
In the input field enter a four digit
password. Use the navigation keys
digits. Select the digit by pressing
Exit to the right with the "Enter"
key to activate the mode.
User mode
to change the value of the
or .
67