Device Overview; Operating And Display Elements; 45°/0° Probe Head; 45°/0° Calibration Cap - ColorLite XS1 Bedienungsanleitung

Device overview

3 Device overview
3.1

Operating and display elements

Fig. – Device overview using the ex-
ample of sph870
48
3.2
The 45°/0° probe head is permanently connected to the
operating unit via a flexible stainless steel cable. With
this probe head the sample is illuminated at an angle of
45° and the diffuse reflected light measured at an angle
of 0°.
This cable contains an optical fibre and should not
be forcefully bent (less than 15 cm radius) during
the measurements.
3.2.1 45°/0° Calibration cap
To calibrate the sph xs1 a certified white standard is
supplied. This standard is traceable to the normal of
the PTB (Physikalisch-Technische Bundesanstalt) in
Braunschweig and
comes with a certificate from the
ColorLite GmbH | sph870/sph900
45°/0° Probe head
Fig. – 45°/0° Probe head