Pc-Interface - ColorLite XS1 Bedienungsanleitung

PC-Interface

Following possibilities are for choice:
Lab ΔE Absolute values CIE L*, a*, b* and Lab ΔE.
Y x z "Y" tristimulus value and chromaticity
values x and y.
HLab Absolute values Hunter Lab and ΔE
Luv ΔE Absolute values CIE L*, u*, v* and ΔE.
X Y Z Tristimulus values X, Y and Z.
ΔL Δa Δb CIE Lab ΔΔ- values are displayed.
Pass/Fail See in chapter 6.5 Pass/Fail
Graph Relative CIE Lab diagram
ΔL Δa Δb
Remission High resolution graph 400 to 700 nm
CMC+CIE94 CIE ΔE94, ΔECMC (1:1 or 1:2 opt.)
Whte/Yellow Displays yellowness and whiteness index
74
7 PC-Interface
The sph xs1 can be connected to a USB port of a
Personal Computer or communicate wireless via a
Bluetooth connection. The connection enables the
exchange of colour standards and colour values as
well as device parameters.
The password for the Bluetooth connection is "1234"
Using the ColorLite ColorDaTra Professional PC-
ColorLite GmbH | sph870/sph900
To activate a colour scale,
open the "Settings" menu.
Select "Colour systems" and
press "Enter".
For image of probe-measuring
values, standards and for the
memory viewer, the setting
can be carried out in each
case separately.
Use the up/down arrow keys
to select a colour scale and
confirm your selection by
pressing "Enter". Your choice
will be marked.