Trouble Shooting - ColorLite XS1 Bedienungsanleitung

Software it is possible to remotely trigger single
measurements, but also automatically trigger in a
variable period.
This quality control database program allows the user
to visualise, store and create reports of the measured
colour data.
Please see the ColorDaTra manual for details.
8

Trouble shooting

The sph xs1 is manufactured using the latest
components and state of the art technology.
A Manipulation inside the device by the user is not
needed.
Do not open the device and or the probe head.
Opening the housing can damaged visual and
mechanically sensitive components.
An unauthorised opening of the device or probe head
or will make all warranty and warranty claims against
the ColorLite GmbH invalid
Problem
The device cannot be
switched on. The display
remains off
No remission spec-trum is
displayed after a loading a
standard from the memory.
Solution
Reload the rechargeable
battery
Colour standards can be
stored with or without the
remission data. To store
with remission spectrum
switch on in the "Settings"
window "Save spectrum"
ColorLite GmbH | sph870/sph900
Please see the ColorDaTra manual for details.
Communication Check the cable connection.
with the PC is Check that COM-port settings are correct.
not working. When the device is connected via USB the
port should be listed. Also if the Bluetooth
driver has been correctly installed the
device serial no. should be visible.
Check that a valid license key has
been installed in Color-DaTra (menu:
spectrophotometer – license overview)
Warning window: Check that the calibration standard is
correct and not contaminated.
Check the probe head opening for
contamination and clean if necessary with
dry and oil free compressed air.
If this does not help please contact the
ColorLite GmbH or your local distributor.
If you have reason to assume that the sph xs1 is not
working correctly or results do not correspond to the
device specifications, please contact the ColorLite GmbH or
your local dealer.
Trouble shooting
75