Warnings/Error Signals - Ottobock C-Leg 3C98-3 Gebrauchsanweisung

Mode switching
INFORMATION
If the Volume parameter is set to '0' in the Cockpit app, there are no beep signals (see
Page 69).
Beep signal Vibration
signal
1 x short 1 x short
1 x short 1 x short
1 x short 1 x short
2 x short 2 x short
3 x short 3 x short

16.2.2 Warnings/error signals

Error during use
Beep signal
–
–
–
10 x long
Additional action per­
formed
Mode switching using the
Cockpit app
Bouncing on the forefoot fol­
lowed by holding still for
1 second in the walking pos­
ition
Prosthetic leg moved next to
contralateral leg, set down
and kept still for 1 second
Prosthetic leg moved next to
contralateral leg, set down
and kept still for 1 second
Prosthetic leg moved next to
contralateral leg, set down
and kept still for 1 second
Vibration signal
1 x long at interval of
approx. 5 seconds
3 x long
5 x long
10 x long
Result
Mode switching is performed
using the Cockpit app.
Bouncing pattern recognised.
Switching to basic mode
(mode 1) carried out.
Switching to MyMode 1 (mode 2)
carried out.
Switching to MyMode 2 (mode 3)
carried out.
Event
Overheated hydraulic
unit
Battery charge level
under 25%
Charge level under
15%
Charge level 0%
After the beep and
vibration signals, the
product switches to
empty battery mode
and then switches
off.
Required action
Reduce activity.
Charge battery soon.
Charge battery immedi­
ately; the product will be
switched off after the next
warning signal.
Charge the battery.
81