Yamaha WaveRunner GP1300R Wartungshandbuch Seite 492

HULL
HOOD
2
1
4
4
1
5
STEERING COLUMN
3
60˚
3
20–40 mm
(0.79–1.57 in)
2
SERVICE POINTS
Steering column bushing inspection
1. Check:
• Bushings
Damage/wear → Replace.
2. Check:
• Steering column
Refer to "CONTROL SYSTEM" in Chap-
ter 3.
Steering column assembly
1. Install:
• Steering switch 1
• Screw clamp 2
• Plastic tie 3
NOTE:
Fasten the steering switch lead 4 with the
plastic tie 3 as shown in the illustration.
2. Install:
• Bushings
• Steering column
• Washer
• Shim(s)
• Magnet
• Screw
• Steering arm
• Bolt
• Washers
• Nut
CAUTION:
Make sure that the steering switch and
magnet 5 do not contact each other.
8-14
E