Modifications To The Device; Employee Safety - Heidolph Hei-TORQUE series Betriebsanleitung

Safety Instructions
▪
The device is designed for indoor use only and under the following ambient conditions:
Ambient temperature
Installation altitude
Contamination level
Overvoltage category
Permissible supply deviations
▪ If the device is operated in corrosive atmospheres, the service life of the device will
decrease based on the concentration, duration and frequency of the exposure to the
corrosive atmosphere e.g. concentrated hydrochloric acid (HCI).

Modifications to the device

▪
It is not permitted to make any unauthorised modifications or changes to the device.
▪
Do not attach or install any parts that have not been approved by the manufacturer.
▪ Unauthorized modifications or changes will void the EC Declaration of Conformity for
the device and operation of the device will no longer be permitted.
▪
The manufacturer is not liable for any damage, dangers or injuries that result from
unauthorized modifications and changes or due to the non-observance of the instruc-
tions in this manual.

Employee safety

➜ Ensure that the device is only operated by qualified specialist personnel and trained
employees.
➜ Observe the following instructions to avoid any personal injuries and property
damage:
- Laboratory regulations
- Accident prevention regulations
- Hazardous Substance Act
- Other generally accepted occupational health and safety regulations
- Local regulations
5 - 31 °C at 80 % relative humidity
32 - 40 °C decreasing linearly to a
maximum 50 % relative humidity
0 - 2,000 m above sea level
2
II
± 10 %
8