Heidolph Hei-TORQUE series Betriebsanleitung Seite 22

Start-Up
Saving the profile
Once all profile steps have been completed:
➜ Turn the control knob counterclockwise
until the Save icon
the display is displayed in orange.
➜ Push the control knob to confirm your
selection.
✓ An alphanumeric keypad appears to
allow you to enter your favorite.
➜ Choose a letter or number by turning
the control knob.
➜ Push the control knob to confirm your
selection.
➜ Delete mistakes using the Delete icon
.
➜ Save your selection by pressing "OK".
✓ The confirmation message "Data
saved" is displayed briefly.
➜ Exit the menu by pressing
another favorite.
✓ The last profile saved is displayed as a template.
➜ Adjust the settings and save the profile under a new name.
If you want to change the gear stage for the next profile:
✓ The last profile saved is displayed as a template.
➜ Select and confirm the Delete icon
✓ The last profile saved is deleted from the template and a blank menu is displayed.
➜ Exit the menu by pressing the "Home" key
➜ Select a different gear stage from the main menu.
➜ Return to the "Edit profile" menu.
➜ Now you can enter a new profile with a changed gear stage.
at the bottom of
to enter
▪ A profile can only be saved with either gear stage I or II.
▪ The gear stage for the profile needs to be selected from the main
menu.
▪ If you wish to use a profile with gear stage I (or II) as the
template for a new favorite, the new profile also has to be entered
in gear stage I (or II).
Enter name:
A B C D
K L M N
U V W X
3 4 5 6 7 8 9
.
22
E F G H I J
O P Q R S T
Y Z _ 0 1 2
OK