Herunterladen Inhalt Inhalt Diese Seite drucken

Installation / Electrical Safety; Personnel Qualification; Operating Company's Obligations; Installation Site - Heidolph Vibramax 100 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Vibramax 100:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Safety Instructions

Installation / Electrical safety

The device may only be connected when the mains voltage corresponds to the infor-
mation on the type plate of the unit.
The mains connection must be accessible at all times.
Repairs may only be performed by a qualified electrician.
Never operate the unit with a damaged power cord.
Always turn the unit OFF and disconnect mains power before performing any
maintenance or service.

Personnel qualification

The device may only be operated by qualified persons.
The device may only be operated by individuals who have been instructed in its
proper use by qualified persons.
The device may only be operated and maintained by persons who are of legal age.
Other personnel may only work with the unit under continuous supervision of an
experienced qualified operator.
This manual must be read and understood by all persons working with the device.
The personnel must have received special safety instructions in order to guarantee
responsible and safe work procedures.

Operating company's obligations



Installation site

The device must be positioned in a suitable location.
The device must be installed sufficiently stable.
All screw connections must be securely tightened.
Installation and operation of the device is only permitted in facilities which are fitted
with the appropriate laboratory equipment (e.g. with air extraction units).
We recommend operation in fume hood enclosures.
The device may only be operated in enclosed spaces and under the following environ-
mental conditions:
Ambient temperature

Changes to the unit

No unauthorized changes may be made to the unit.
No parts may be used which have not been approved by the manufacturer.
Unauthorized changes result in the EC Declaration of Conformity losing its validity,
and the appliance may no longer be operated.
The manufacturer is not liable for any damage, danger or injuries that result from
unauthorized changes or from operating the unit other than described in this manual.
80 % relative humidity, no condensation
0 - 50 °C
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis