Safety Settings - Heidolph Hei-TORQUE series Betriebsanleitung

Start-Up

Safety settings

Use the "Safety settings" menu to individually adjust all settings required by the nature
of your sample to ensure personal safety.
Setting the acceleration
Switching rotation on may result in
splashing at high acceleration.
The default setting is medium
acceleration.
➜ Select the "Acceleration" menu item.
✓ The current setting is marked with an
asterisk.
➜ Select the required setting.
➜ Push the control knob to confirm.
✓ The selected setting is displayed briefly
for confirmation.
➜ Press "Back"
"Acceleration" menu.
Setting a speed limit
Some samples may only be exposed to low rotation speed. In this menu you can restrict
the speed to avoid accidental changes.
The default setting is the maximum
possible speed.
➜ Select the "Speed limit" menu item.
➜ Set the required maximum speed in
rpm.
➜ Push the control knob to confirm.
✓ A confirmation is displayed briefly.
➜ Press "Back"
✓ The speed cannot be set to higher than
this speed limit, regardless of the gear
stage selected.
to exit the
to exit the menu.
Acceleration
Speed limit
Torque limit
Medium *
Acceleration: medium
Speed limit [rpm]
2000
Limit saved!
19
Fast
Slow
OK