Optional: Connecting A Serial Device Of Audio Devices; Establishing The Data Transmission To The Computer Module - G&D LwLVision-USB 2.0 Installationsanleitung

Installation

Optional: Connecting a serial device of audio devices

RS 232 Micro In Speaker
Trans.
Service Tx Rx USB 2.0 Devices
RS232: Connect the serial end device to this interface.
Connect a microphone to this interface.
Micro In:
Connect the console speakers to this interface.
Speaker:

Establishing the data transmission to the computer module

IMPORTANT: The device uses laser technology complying with laser class 1. Although
class 1 laser beams are considered nonhazardous, avoid direct eye contact.
Do not stare into the beam using optical instruments.
NOTE: Please remove the protection caps from the Transmission interface and the
cable plugs.
Insert the SC plug of a fibre optic cable.
Trans. Tx:
Connect the other end of the cable to the Trans. Rx interface of the user module.
Trans. Rx: Insert the SC plug of a fibre optic cable.
Connect the other end of the cable to the Trans. Tx interface of the user module.
NOTE:
Please remove the protection caps from the USB 2.0 Trans. and the cable
plugs.
USB 2.0 Trans. Tx: Insert the LC plug of a fibre optic cable.
Connect the other end of the cable to the USB 2.0 Trans. Rx interface of the
user module.
USB 2.0 Trans. Rx: Insert the LC plug of a fibre optic cable.
Connect the other end of the cable to the USB 2.0 Trans. Tx interface of the
user module.
10 · G&D LwLVision-USB 2.0
Keyb. PS/2 Keyb. USB
Mouse
VGA Out DVI Out
Mouse USB 2.0 Trans.
Tx Rx
Red. Power