Selecting The Usb-Hid Mode - G&D DP-Vision-Fiber Installationanleitung Und Betriebsanleitung

Configuration
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender you want to con-
figure.
3. Click on the tabs
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
4. Under
Freeze mode
(default)
Disabled
Enabled
5. If the Freeze mode is active, additionally select one or both options available
under
Freeze visualization
Frame
OSD
6. Click to save your changes.
OK

Selecting the USB-HID mode

The KVM extender supports various USB input devices. You can use the special fea-
tures of a particular USB input device after selecting the specific USB keyboard
mode.
As an alternative to the specific USB keyboard modes, you can also use the
HID mode. In this mode, data of the USB device connected to the top
socket of the user module is transmitted to the computer module without being
altered.
IMPORTANT: The
ever, being able to operate particular HID device in generic HID mode can not be
guaranteed.
IMPORTANT:
When connecting a USB hub or a USB composite device, which
contains multiple USB devices, only the first of the connected HID devices can be
used in generic HID
35 · G&D DP-Vision-Fiber
Remote > General
select one of the following options (see above):
:
 shows a coloured frame when disconnected
 shows Frozen and the time passed since disconnection
generic HID mode supports many available HID device. How-
mode.
on the directory tree.
.
generic
Keyb./Mouse