Troubleshooting - Medion MD 81664 Bedienungsanleitung

Troubleshooting

If errors occur, check first whether you can correct the problem yourself. The following overview may help
you.
Never try to repair the device yourself. Contact our service centre or other
qualified personnel if a repair is necessary.
Fault
GENERAL
No standby display
The player does not work
The disc does not play even
though PLAY/PAUSE has been
pressed, or stops again
immediately.
The device does not respond to
the remote control
No picture
Distorted picture
38
Possible cause/action

Check the mains connection: Is the plug firmly inserted in the
mains socket?

Press the STANDBY/ON button on the player or remote control.
If the unit has been affected by a storm, static charging or other
external factor, try the following procedure: Press the
STANDBY/ON button on the player (standby mode). Then pull out
the mains cable and plug it back in.

Is the disc inserted with the title (printed) side facing upwards?
Check whether the disc is damaged by trying another disc. If the
disc is dirty, clean it carefully, wiping it from the centre to the edge
with a soft, dry cloth.
Does the inserted disc DVDs, VCD or CD have a format that can not
be played?

For commercial DVDs: Does the DVD have the correct regional
code (2)?

If condensation has formed in the device: give the player one to
two hours to dry off.

Check whether the batteries need changing and have been inserted
correctly. Remove anything which may be blocking the signal
between the infrared transmitter, the remote control and the unit's
sensor.

Is the distance between the remote control and the player too
great (over 7m)?

Are the cable connections between the DVD and television correct
and undamaged?

Is the television switched on?

Have you selected the video channel on the television?
Has the correct function been selected (DVD)?

Have you selected the correct video output on the DVD player?

Do you need to carry out the channel scan again?

Check whether the DVD is dirty and if necessary clean it carefully,
wiping it from the centre to the edge with a soft, dry cloth. Slight
picture distortion is not a malfunction.