Troubleshooting - Medion MD 80686 Anleitung

DVD-Porty MD 80686 D EN.book Seite 27 Montag, 30. Mai 2005 4:05 16
T
ROUBLESHOOTING
If errors occur, check first whether you can correct the problem yourself. The following
overview may help you.
Never try to repair the device yourself. Contact our service centre or other qua-
lified personnel if a repair is necessary.
PROBLEM
GENERAL
No function,
No standby display
The disc does not play
even though PLAY has
been pressed, or stops
again immediately
The device does not re-
spond to the remote
control
Poor sound when the
device is connected to
a TV, amplifier etc.
POSSIBLE CAUSE / REMEDY
Power supply is incorrect (battery or mains adapter).
Is the disc inserted with the title facing upwards?
Check whether the disc is damaged by trying another
disc. If the disc is dirty, clean it carefully, wiping it from
the centre to the edge with a soft, dry cloth.
DVD: Does the DVD have the correct regional code (2)?
If condensation has formed: give the player one to two
hours to dry off.
Check whether the batteries need changing and have
been inserted correctly. Remove anything which may be
blocking the signal between the infrared transmitter, the
remote control and the device's sensor.
Is the distance between the remote control and the play-
er too great?
The connections were not made correctly.
The contacts are dirty.
The digital audio output is not connected to a compati-
ble device.
EN
EN-27