Frame; Suspensions; Brakes; Wheels - Husqvarna TE 610 2007 Werkstatt-Handbuch

FRAME

Single-beam in steel tubes of circular section splitting approx.
on line with the exhaust; light alloy rear frame
Steering angle................................................................. 39° each side
Steering axis angle ................................................ 27° (SM); 28° (TE)
Forward travel (in.) ................................................... 2.7 (SM); 3.9 (TE)

SUSPENSIONS

Front
"MARZOCCHI" Overturned forkrod telehydraulic fork with
advanced pin; forkrods 1.77 in. diameter; hydraulic brake
adjustment both in compression and extension
Axle travel on leg axis (in.) ................................. 9.84 (SM); 11.8 (TE)
Rear
Swinging arm in light alloy with progressive damping, "SACHS"
hydraulic mono-shock absorber with helical spring. Spring
preloading adjustment; hydraulic brake adjustment both in
compression (DOUBLE) and in extension.
Wheel travel (in.).................................................. 11.4 (SM); 12.6 (TE)

BRAKES

Front
Drilled fixed disc 10.24 in. dia. with floating caliper (TE); drilled
floating disc 12.6 in. dia. (SM) with fixed caliper
Pads area .................................... 5.02 sq. in. (TE); 6.14 sq. in. (SM)
Independent hydraulic circuit and pump with control on the
handlebar right side
Rear
Drilled floating disc ø 8.66 in. with floating caliper
Pads area ............................................................................. 4.57 sq. in.
Independent hydraulic circuit; controlled by pedal and pump on
the motorcycle right side.

WHEELS

Rims
Front (TE) ......................... "TAKASAGO" Excel in light alloy: 1,6x21"
Front (SM)................................... "SANREMO" in light alloy: 3,50x17"
Rear (TE)........................... "TAKASAGO" Excel in light alloy: 2,5x18"
Rear (SM)................................... "SANREMO" in light alloy: 4,25x17"

TIRES

Front
(TE).................. "Metzeler" MCE KAROO- "Pirelli" MT 21; 90/90x21"
(SM)........"Pirelli" MTR 21 DIABLO- "Dunlop" D208 F; 120/70-17"
Rear
(TE)................ "Metzeler" MCE KAROO- "Pirelli" MT 21; 140/80x18"
(SM)...... "Pirelli" MTR 22 DIABLO- "Dunlop" D208; 150/60x17"
GENERALITÀ
GENERAL
NOTES GENERALES
ALLGEMEINES
GENERALIDADES
Cold tire pressure
(front SM- Road use, driver only)..............................................25.6 psi
(front SM- Road use, driver and passenger)........................ 28.4 psi
(rear SM- Road use, driver only).............................................. 28.4 psi
(rear SM- Road use, driver and passenger)......................... 34.1 psi
(front SM- Racing use, driver only)...............................................20 psi
(rear SM- Racing use, driver only)............................................22.7 psi
(front TE- Road use, driver only).............................................. 17.1 psi
(front TE- Road use, driver and passenger)......................... 21.3 psi
(rear TE- Road use, driver only)............................................... 21.3 psi
(rear TE- Road use, driver and passenger)..........................25.6 psi
(front TE- Racing use, driver only)................................ 14.2÷15.6 psi
(rear TE- Racing use, driver only)................................. 12.8÷14.2 psi
A.10 Part. N. 8000 A8466 (12-2006)