Commissioning - Jungheinrich EFG-Vac 25 Betriebsanleitung

2

Commissioning

f
Commissioning and instructing drivers may only be performed by appropriately
trained personnel. If several trucks are delivered, care must be taken that only load
carrying units, lifting masts, and basic truck with identical serial numbers are
assembled.
m
The truck must only be operated on
battery current.
current will damage the electronics.
Cables connected to the battery (trailing
cables) must be less than 6 meters in
length.
In order to prepare the truck for work
following delivery or transportation, the
following operations must be performed:
–– Check equipment for completeness.
–– Check battery connections and acid
level (refer to chapter D, section 6).
–– Check tightening torque of wheel nuts
(refer to chapter F, section 6.3).
–– Bring the truck into service as
prescribed
(refer to chapter E, section 3).
C 2
Rectified alternate