Fuels, Coolants And Lubricants - Jungheinrich EFG-Vac 25 Betriebsanleitung

5.1

Fuels, coolants and lubricants

Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
f
Improper handling is injurious to health, life, and environment. Consumption type
materials must be stored in adequate containers. They might be inflammable and,
therefore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if
mixing is expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption type material and binding agent is to be
disposed of according to the regulations.
Code Order-no.
50062046
A 50062045
50124051
D 50124052
E 50055726
G 29201280
N 50124053 2x approx. 3 l
Grease data
Code Saponification Drop point
E Lithium
1)
valid for temperature -5/+30 °C
2)
valid for temperature -20/-5 °C
3)
valid for temperature +30/+50 °C
Quantity Designation
Renolin 32
34.5 l Renolin 22
3)
HV 68
Hydraulic oil
0.25 l
ATF Dexron II-D
Lubricating grease
3)
KP 2 K
Chain spray
Transmission oil STOU
Universal
Worked
penetraton at
°C
25 ° C
185 265-295
1)
2)
Hydraulic system
Hydraulic brake system
Front and rear wheel -
wheel bearing
Chains
Transmission
NLG1 class
2
Used for
Usage
temperature °C
-35/+120
F 7