Jungheinrich EFG-Vac 25 Betriebsanleitung Seite 55

Reversing brake (singel-pedal):
–– While travelling, toggle travel direction switch (14/44) to the opposite travel
direction. By means of the drive current controller the truck is generatively braked
until travel continues in opposite direction.
f
Depending on the truck version
the travel direction switch can be
mounted
–– either at the MULTIPILOT figure (2) or
–– at the SOLOPILOT figure (2).
Reversing brake (dual-pedal)
While travelling, push down accelerator pedal (11/13) for the opposite travel direction.
By means of the drive current controller the truck is generatively braked until travel
continues in opposite direction.
Parking brake:
–– Engage the parking brake
f
The parking brake actuates an on/off valve, i. e. deceleration cannot be performed
sensitively.
A
The parking brake mechanically decelerates the drive wheels via multiple disks.
f
The parking brake hold the truck with the maximum permissible load, on clean
surface, at a 15% slope.
Spring-loaded brake
The spring-loaded brake engages approximately 30 seconds (adjustable) after
standstill of the truck and approximately 1 to 15 second(s) after taking away the
weight from the driver seat.
When stopping on a ramp the truck is electrically held in position until the spring-
loaded brake engages.
When starting to travel, a torque is built up at the traction motor before disengaging
the spring-loaded brake, which prevents the truck from rolling backward.
E 20
44
v
r
(1)
14
(2)