Tyre Pressure - GGP ITALY 102 Gebrauchsanweisung

HOW TO USE THE MACHINE

5.3.2 Tyre pressure

Having the correct tyre pressure is the main condition for ensuring that the cutting
deck is horizontal and thus mows evenly.
Take off the hubcaps (if fitted), unscrew the valve caps and connect a compressed air
line with a gauge to the valves.
1,5 bar
1,0 bar
5.3.3 Filling with oil and fuel
NOTE
With the engine stopped, check its oil level.
Exactly following the methods described in the
engine manual, this must be between the MIN
and MAX marks on the dipstick.
Refuel using a funnel, but do not completely fill
the tank.
The tank's capacity is about 7 litres.
DANGER!
ried out in an open or well ventilated area
with engine stopped. Always remember
that petrol fumes are inflammable. DO NOT
TAKE A NAKED FLAME TO THE TANK'S
OPENING IN ORDER TO SEE THE TANK'S
CONTENTS AND DO NOT SMOKE WHEN
REFUELLING.
IMPORTANT
plastic parts to avoid ruining them. In the event
of accidental leaks, rinse immediately with
water.
(13 x 5,00-6)
(15 x 5,00-6)
The type of oil and fuel to use is given in the engine manual.
Refuelling should be car-
Do not drip petrol onto the
1,2 bar
23
EN
MAX
MIN