20
EN
WARNING!
only be engaged when the
machine is stopped.
NOTE
pedal is used, whether forwards or
for reverse, when the parking brake
(4.5) is engaged, the engine stops. .
4.33 LEVER TO RELEASE
THE HYDROSTATIC
TRANSMISSION
This lever has two positions as shown on the label:
«A» = Transmission engaged: for all usage conditions, when moving and during
cutting;
«B» = Transmission released: considerably reduces the effort required for moving
the machine by hand, with the engine turned off.
IMPORTANT
be carried out only when the engine has stopped with the pedal (4.32) at position
«N».
Reverse must
If the drive
To avoid damaging the transmission unit, this operation must
CONTROLS AND INSTRUMENTS
4.32
N
R
4.33
F
B
A