Seat Adjustment; Tyre Pressure - GGP ITALY 98SD Gebrauchsanweisung

18
EN
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neutral";
– the operator leaves his seat with the transmission in "neutral" but without applying
the parking brake;
– the parking brake is engaged without disengaging the blades;
– the speed change is activated (
brake on.
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry out several checks and operations to
ensure you can work efficiently and in maximum safety.

5.3.1 Seat adjustment

To change the seat position, loosen the four fixing
bolts (1) and slide it along the slots.
Once you have found the right position, tighten
the four screws (1).

5.3.2 Tyre pressure

Having the right tyre pressure is the main condition for ensuring that the cutting deck
is horizontal and mows evenly.
Unscrew the valve caps and connect a compressed air line with a gauge to the valves
and adjust the pressure to the indicated values.
1,5 bar
1,0 bar
(13 x 5,00-6)
(15 x 5,00-6)
4.22) or the drive pedal (
1
1,2 bar
HOW TO USE THE MACHINE
4.32) with the parking
1