GGP ITALY 102 Gebrauchsanweisung Seite 92

44
EN
PROBLEM
15. Unusual vibrations
while working
16. With the engine
running, the machine
does not move when
the drive pedal is
pressed. (for hydro-
static drive models)
If problems continue after having carried out these operations, Contact your Dealer.
WARNING!
necessary equipment and the technical knowledge.
The guarantee is automatically revoked and the manufacturer declines all
responsibility for any repairs which are badly done.
LIKELY CAUSE
– collector channel is blocked
– cutting deck full of grass
– the blades are imbalanced
– blades loose
– fixing bolts loose
– disengage lever in positon «B»
( 4.33)
Do not take on complicated repair work if you don't have the
TROUBLESHOOTING
SOLUTION
– remove the grass-catcher and empty
the collector channel (
– clean the cutting deck(
– Contact your dealer
– Contact your dealer
– check and tighten all the fixing bolts
of the engine and frame
– put into position «A»
5.4.7)
5.4.10)