Replacing Bulbs; Replacing A Fuse - GGP ITALY 102 Gebrauchsanweisung

38
EN
contrary, to prevent an uneven cut it will be necessary to adjust the alignment of the
cutting deck.
IMPORTANT
axle and carefully re-fit the snap ring (1) and washer (2).
6.3.4 Replacing and repairing tyres
The tyres are of the «Tubeless» type and therefore all puncture repairs will have to be
carried out by a tyre-repair expert in accordance with the methods for this kind of tyre.

6.3.5 Replacing bulbs

The bulbs (18W) have a bayonet fitting and are
installed in the bulb holder which can be taken
out by turning it anti-clockwise, using pliers.

6.3.6 Replacing a fuse

The machine is fitted with fuses (1) with different capacities and functions. Specifically:
– 10 A fuse = protects the main and power circuits of the electronic board. When it
blows, the machine stops and the dashboard switches off.
Before re-fitting a wheel, smear some waterproof grease on the
MAINTENANCE