GGP ITALY 102 Gebrauchsanweisung Seite 83

MAINTENANCE
Work
1. MACHINE
1.1 Check of tight fixing and sharpness of blades
1.2 Blade replacement
1.3 Check the transmission belt
1.4 Transmission belt replacement
1.5 Check the blade drive belt
1.6 Blade drive belt replacement
1.7 Check the belt connecting blades
1.8 Replacement of belt connecting blades
1.9 Check and adjustment of brake
1.10 Check and adjustment of drive
1.11 Check engagement and brake of blade
1.12 Check all fastenings for tight fitting
1.13 General lubrication
1)
2. ENGINE
2.1 Engine oil change
2.2 Check and cleaning of air filter
2.3 Air filter replacement
2.4 Check fuel filter
2.5 Fuel filter replacement
2.6 Check and cleaning of spark plug points
2.7 Replacement of spark plug
1)
See the engine manual for the full list and frequency.
2)
At the first signs of any malfunction, contact your Dealer immediately.
3)
General lubrication should also be carried out whenever the machine is to be left unused for a long
period.
6.2.1 Engine
IMPORTANT
the engine manual.
To empty the oil from the engine, hold the exten-
sion tube (1) firmly in place and unscrew the drain
plug (2).
When refitting the plug (2) make sure the seal (3) is
positioned correctly and tighten it as far as possi-
ble, holding the extension tube (1) firmly in place.
2)
2)
3)
Follow all the instructions in
Hours Done (date or n° of hours)
25
100
25
–
25
–
25
2)
–
10
10
10
25
25
.....
.....
.....
.....
.....
.....
.....
3
EN
1
2
35