SIP SILVERCUT DISC 340 F FC Betriebsanleitung Seite 164

Make sure the side pin is completely locked in the
middle opening of the handle.
Both hooks must be locked to the bolts.
Now you can release the mower hydraulics and the
mower hangs leaning on the hooks.
Lift the complete mower additionally with the three-
point system of the tractor hydraulics and the mower
is ready for transport.
3.3.4 S-FLOW connection – mowing
Lower the scythe on the three-point connection so
that it hangs on the chains.
In the basic working position (mowing height approx.
55mm), the upper frame is parallel to the ground. You
can set the mowing height by changing the length of
the upper clasp in the three-point system of the
tractor.
The disconnection support is in working position, fixed
on the bottom opening.
Set the force of the cutter bar relief according to the
surface.
35
SILVERCUT