SIP SILVERCUT DISC 340 F FC Betriebsanleitung Seite 156

33º-42º
4
–
Side attachment of the hydraulic relief is
recommended!
Side attachment of the hydraulic relief:
– Fix the chain attachment holders (2) onto the side
holders (5).
– Using the tractor hydraulics, lift the mower to the
highest position.
– Open the hydraulic valve on the machine (4).
– Pull the chains on the relief cylinders through the
holders and fix them into the groove.
– Fix the chains on both sides to allow the pistons of
the hydraulic cylinders to be extended from 130
mm to 160 mm in the working position.
– Check the angle of both cylinders which should be
between 33º and 42º.
5
2
27
SILVERCUT