Instruction for work
4
– The correct blade position is the blade
with direction in the disc turning
direction.
– When one cutting edge is worn out turn
the blade and use the other cutting
edge.
– Inserted blade must be fixed in
movably.
10.2 Additional slider for a greater cutting height
– With additional sliders for a greater cutting height
we can achieve the cutting height of 70–100mm.
Their usage is especially recommended on gravelly
ground. Identification No.: 765200450.
5
10.3 Additional slider
– Additional sliders improve the usage life of the
slider. Their usage is especially recommended on
gravelly ground and for cutting seeded grass.
Identification No.: 765200440.
60